Vital Energi is one of the UK's leading installers of pre-insulated pipes, and employs some of the most experienced designers and engineers in the industry. This expertise means that all our pre-insulated pipe systems are designed to meet all district heating and cooling needs, with every element of every system designed to the highest standards. This ensures that the entire scheme, with its operating life time of thirty years or more depending on conditions, is fully documented.

We offer a range of different insulation thicknesses to meet the requirements of each individual project, and our state-of-the-art insulation techniques provide consistent CO2 reductions. Each pipe section is connected with the most reliable joint system available and because our designs include as few joints as possible, we can offer faster installation times and less risk of leakage. We also provide built in surveillance systems which enable us to trace and identify any defects before any system losses. In short, we strive to meet clients' differing needs, while always ensuring the best and most economical installation method for a project.

Single Pipe

Steel and copper pipe systems are a complete transmission and distribution system for district heating and cooling applications.



Features:

• Delivered in standard 6m,12m and 16m lengths
• Suitable for installation above and below ground
• Suitable up to 25bar operating pressure
• Machine curves can be supplied to reduce fittings
• Diffusion tight
• Pipework installed 30 years is still in operation
• EN253 Compliant

---

Double Copper

Copper pipe system are a complete transmission and distribution system for hot and cold domestic water.



Features:

• Delivered in standard 12m lengths
• Soft, drawn, seamless pipes designed for capillary soldering
• Suitable up to 25bar operating pressure
• Diffusion tight
• Reduced heat loss
• Fewer components
• Reduced whole life cycle cost
• EN253 Compliant

---

Twin Pipe

Steel and copper pipe systems are a complete transmission and distribution system for district heating and cooling applications.



Features:

• Delivered in standard 12m (copper & steel) and 16m lengths (steel only)
• Suitable up to 25bar operating pressure
• Machine curves can be supplied to reduce fittings
• Diffusion tight
• Reduced heat loss
• Fewer components
• Reduced civil engineering cost
• Reduced whole life cycle cost
• EN253 Compliant

---

Flexible Pipes with diffusion barrier

All of our flexible ranges of pipes form a complete flexible pipe system for district heating distribution networks and house entries.

---

AluFlex

Features:

• Delivered in 50m and 100m rolls
• All products are available in twin pipe solutions
• Certified thermal conductivity (50°C): 0.023 W/mK
• Ideal for tunnelling and thrust- bore techniques
• Diffusion tight
• Reduced heat loss
• Fewer components
• Reduced whole life cycle cost

---

CopperFlex

Features:

• Delivered in 50m and 100m rolls
• All products are available in twin pipe solutions
• Certified thermal conductivity (50°C): 0.023 W/mK
• Ideal for tunnelling and thrust- bore techniques
• Diffusion tight
• Reduced heat loss
• Fewer components
• Reduced whole life cycle cost

---

SteelFlex

Features:

• Delivered in 50m and 100m rolls
• All products are available in twin pipe solutions
• Certified thermal conductivity (50°C): 0.023 W/mK
• Ideal for tunnelling and thrust- bore techniques
• Diffusion tight
• Reduced heat loss
• Fewer components
• Reduced whole life cycle cost

---